Show Menu
OEM Fastening Systems | Special Components & Fastening Systems
P & HP Series press-in threaded inserts for plastics provide adequate holding strengths without the use of ultrasonic or heat equipment. These straight-hole threaded inserts are most commonly used in thermoset or other hard plastics. The pilot end provides for fast alignment. The insert is placed in a hole, pressure is applied and the three bands of helical knurls dig down deep and lock the insert in place, providing excellent torque-out resistance.
26 - 37 of 37 | Results Per Page | View | Unit of Measure
1 2 

Item #

Item Name

Thread Size

Thread Type

A

B

N/A HP Series 0.614 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A 1/4-20 N/A Inch N/A 0.374 in N/A 0.050 in
N/A HP Series 0.614 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A 1/4-28 N/A Inch N/A 0.374 in N/A 0.050 in
N/A HP Series 0.736 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A 5/16-18 N/A Inch N/A 0.433 in N/A 0.050 in
N/A HP Series 0.736 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A 5/16-24 N/A Inch N/A 0.433 in N/A 0.050 in
N/A HP Series 0.242 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A M2.0 x 0.4 N/A Metric N/A 0.189 in N/A 0.024 in
N/A HP Series 0.300 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A M3.0 x 0.5 N/A Metric N/A 0.220 in N/A 0.024 in
N/A HP Series 0.364 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A M3.5 x 0.6 N/A Metric N/A 0.250 in N/A 0.029 in
N/A HP Series 0.426 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A M4.0 x 0.7 N/A Metric N/A 0.283 in N/A 0.032 in
N/A HP Series 0.488 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A M5.0 x 0.8 N/A Metric N/A 0.313 in N/A 0.043 in
N/A HP Series 0.488 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A M5.0 x 0.8 N/A Metric N/A 0.313 in N/A 0.040 in
N/A HP Series 0.614 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A M6.0 x 1.0 N/A Metric N/A 0.374 in N/A 0.050 in
N/A HP Series 0.736 Inch (in) Minimum Boss Press-In Threaded Insert for Hard Plastics N/A M8.0 x 1.25 N/A Metric N/A 0.433 in N/A 0.050 in
26 - 37 of 37 | Results Per Page | View | Unit of Measure
1 2 
AtlasAvdel
AztechDelta PT
POPRolok
SEMSTaptite 2000
Swageform